Cross Technologies 2016-03A Manuel d'instructions télécharger pdf (Page 6)

C) Status Requests -

Table 1.2 lists the status requests for the 2016-03A and briefly describes them.

* PLEASE NOTE: The two character {aa}(00-31) prefix, in the table below,

should be used ONLY when R

S-485, (OPTION-Q), is selected.

TABLE 1.1 2016-03A Status

Requests

TABLE 1.1 2016-03A Status Requests

Command Syntax* Description

Command Status {aaS1} Returns {S1bbbbccIA} where:

• bbbb = Rx frequency

4 characters - standard (7 characters - Option-X)

• cc = Rx gain

• I = 1 - spectrum invert enabled

• A = summary alarm; 1=alarmed, 0=normal

10MHz Ref Status {aaS2} Returns {S2ER} where:

(option -E only)

• E = 1 - external 10 MHz switched in

• R = 1 - 10 MHz ref inserted on RF input connector

LNB Current {aaS3} Returns {S3eee} where:

(option -L only)

• eee = LNB current (000 to 500 = 0 to .500 A)

2016-03A Manual, Rev A Page 6 11/25/08

1 2 3 4 5 6 7 8 9 10 11 ... 17 18

Pas de commentaire

Cross Technologies 2016-03A Manuel d'instructions Page 6